You are here » Bearings » Accessories, Screws, Hubs, CNC parts... » CNC Machining

5 mm Shoulder Screw with M4 Thread for Roller Mounting - SDS5-10M4F9

5 mm Shoulder Screw with M4 Thread for Roller Mounting - SDS5-10M4F9

5 mm Shoulder Screw with M4 Thread for Roller Mounting - SDS5-10M4F9

Match a 5 mm locating shoulder and 10 mm shoulder length to a M4 x 0.7 threaded mounting hole. SDS5-10M4F9 is a SUS304 stainless steel shoulder screw supplied with a matching nut. Its unthreaded shoulder provides the locating or running surface; the smaller threaded end secures the assembly.

Original SDS shoulder screw family photograph from the ZOTY catalogue

Representative series photograph showing different shoulder lengths. Order by the selected model and dimensions below.

Dimensions for the mounting drawing

ModelSDS5-10M4F9
Screw materialSUS304 stainless steel
Shoulder diameter D5 mm nominal
Shoulder diameter deviationUpper -0.004 mm; lower -0.012 mm
Shoulder length L10 mm
Head diameter A9 mm
Head thickness T5 mm
Thread length F9 mm
Thread M and matching nut NM4 x 0.7
Nut supplyMatching nut supplied

Original SDS dimensional drawing showing shoulder D and L, head A and T, thread F and M

Check shoulder fit separately from thread engagement

The 5 mm shoulder is the surface to compare with a roller, pulley or mating bore. The M4 thread is a separate fastening interface. A matching thread alone does not establish a correct shoulder fit. Check the bore tolerance and the catalogue shoulder deviations together on the assembly drawing.

The 10 mm shoulder length L and 9 mm thread length F describe different sections. Confirm the component stack, side clearance, head clearance and available thread depth. Do not use the overall screw length as the roller mounting width. Specify washers or spacers on the assembly drawing when required.

Request a sample or OEM batch

Include SDS5-10M4F9, mating bore dimensions and tolerance, mounting thread, drawing revision, sample quantity, batch quantity and destination. State whether the shoulder acts as a locating surface or a running surface, along with speed, load direction and environment. Confirm torque, strength requirements, surface finish and inspection documents for the intended installation; the catalogue does not provide numeric load or torque ratings.

Request SDS5-10M4F9 samples and batch pricing | Browse machined mounting components | Browse mounting accessories