SDS5-20M4F9 combines a 5 mm locating shoulder, 20 mm shoulder length and M4 x 0.7 thread. Use these three dimensions to match the screw to the component bore, assembly stack and threaded connection. The SUS304 stainless steel screw is supplied with a matching nut.
| Model | SDS5-20M4F9 |
|---|---|
| Material | SUS304 stainless steel |
| Shoulder diameter D | 5 mm |
| Shoulder length L | 20 mm |
| Head diameter A | 9 mm |
| Head thickness T | 5 mm |
| Thread | M4 x 0.7 |
| Thread length F | 9 mm |
| Shoulder diameter deviation | -0.012 to -0.004 mm |
| Matching nut | Supplied |

SDS series photograph. Use the model-specific dimensions above for selection.

Series dimensional drawing showing the shoulder, head and threaded portion.
The nominal 5 mm shoulder is not the M4 thread diameter. Compare the shoulder deviation with the mating bore tolerance and the intended fit. Check the 20 mm shoulder length against the parts being located, and allow space for the 9 mm head and supplied nut.
The 9 mm threaded portion is separate from the shoulder length. Send a section drawing if a spacer, bearing inner ring or bracket is included so that thread engagement and the complete stack can be reviewed. Tightening torque and load capacity require confirmation for the assembly.
The shoulder length here is 20 mm. The SDS5-10M4F9 configuration has a 10 mm shoulder length. The longer 20 mm shoulder changes the supported assembly stack; the threaded portion remains a separate dimension. See SDS5-10M4F9 shoulder screw dimensions or the shoulder screw and CNC machining range.
Send the model SDS5-20M4F9, mating bore size and tolerance, stack thickness, thread specification, drawing revision, sample quantity, batch quantity and delivery destination. Include the working environment and required assembly load so the configuration and quotation can be confirmed.
Request a quotation for SDS5-20M4F9