SDS5-25M4F9 has a 5 mm shoulder, 25 mm shoulder length and M4 x 0.7 thread. The SUS304 stainless steel screw includes a matching nut.
| Model | SDS5-25M4F9 |
|---|---|
| Material | SUS304 stainless steel |
| Shoulder diameter D | 5 mm |
| Shoulder length L | 25 mm |
| Head A / T | 9 / 5 mm |
| Thread | M4 x 0.7 |
| Thread length F | 9 mm |
| Shoulder deviation | -0.012 to -0.004 mm |
| Matching nut | Supplied |


Series photograph and common dimensional drawing; use the selected model dimensions. The drawing is not to scale.
Check the bore tolerance against the shoulder deviation of -0.012 to -0.004 mm. Keep the 25 mm shoulder length separate from the 9 mm threaded portion. Allow for the 9 mm head diameter and 5 mm head thickness. Select the component stack, side clearance and thread engagement on the assembly drawing; a shared thread size does not establish interchangeability. Confirm tightening torque, working load and operating conditions before ordering.
Compare shoulder screw configurations
Send SDS5-25M4F9, your assembly drawing and revision, mating dimensions, operating conditions, sample and batch quantities, and delivery destination. Confirm the final configuration and lead time before ordering.