Match a 6 mm locating shoulder and 10 mm shoulder length to a M5 x 0.8 threaded mounting hole. SDS6-10M5F9 is a SUS304 stainless steel shoulder screw supplied with a matching nut. Its unthreaded shoulder provides the locating or running surface; the smaller threaded end secures the assembly.

Representative series photograph showing different shoulder lengths. Order by the selected model and dimensions below.
| Model | SDS6-10M5F9 |
|---|---|
| Screw material | SUS304 stainless steel |
| Shoulder diameter D | 6 mm nominal |
| Shoulder diameter deviation | Upper -0.004 mm; lower -0.012 mm |
| Shoulder length L | 10 mm |
| Head diameter A | 10 mm |
| Head thickness T | 5 mm |
| Thread length F | 9 mm |
| Thread M and matching nut N | M5 x 0.8 |
| Nut supply | Matching nut supplied |

The 6 mm shoulder is the surface to compare with a roller, pulley or mating bore. The M5 thread is a separate fastening interface. A matching thread alone does not establish a correct shoulder fit. Check the bore tolerance and the catalogue shoulder deviations together on the assembly drawing.
The 10 mm shoulder length L and 9 mm thread length F describe different sections. Confirm the component stack, side clearance, head clearance and available thread depth. Do not use the overall screw length as the roller mounting width. Specify washers or spacers on the assembly drawing when required.
Include SDS6-10M5F9, mating bore dimensions and tolerance, mounting thread, drawing revision, sample quantity, batch quantity and destination. State whether the shoulder acts as a locating surface or a running surface, along with speed, load direction and environment. Confirm torque, strength requirements, surface finish and inspection documents for the intended installation; the catalogue does not provide numeric load or torque ratings.
Request SDS6-10M5F9 samples and batch pricing | Browse machined mounting components | Browse mounting accessories