6 mm Bore PU Roller with Sealed Bearings - PULT62635-30
PULT62635-30 combines a 6 mm bearing bore, 35 mm wheel diameter and 30 mm axial width. Its two 626-2RS bearings and 85 Shore A polyurethane tread provide a defined configuration for comparing supplier quotations. Ask for the complete aluminum-core assembly and retain the seal designation in the purchase specification.
Representative PULT series photograph. It illustrates construction; confirm the selected model, colour and final appearance against the order drawing.
Catalogue dimensions and construction
| Full model | PULT62635-30 |
|---|
| Bearing bore d | 6 mm |
|---|
| Outside diameter OD | 35 mm |
|---|
| Overall axial width L | 30 mm |
|---|
| Core / tread | Aluminum / polyurethane |
|---|
| Tread hardness | 85 Shore A |
|---|
| Bearing arrangement | Two 626-2RS chrome steel bearings |
|---|
| Bearing closure | 2RS rubber seals |
|---|
Series dimension reference. The table gives this model's nominal dimensions; request an approval drawing for tolerances, bearing seats and retention.
Check the installation before ordering
Check the 6 mm shaft and the fit required by the bearing inner rings. Allow for the 30 mm overall wheel width and 35 mm outside diameter. Review shaft shoulders, spacers and axial retention so tightening does not clamp the rotating wheel. State the contact surface, load direction, speed and duty cycle for suitability review; the catalogue dimensions alone are not an operating load rating.
Compare an existing ZOTY configuration
PULT62630-30 has the same 6 mm bore, 30 mm width and 626-2RS bearing designation, but a 30 mm outside diameter. The 35 mm wheel adds 2.5 mm to the running radius, changing its contact position. Confirm center distance and clearance before substituting it.
Compare PULT62630-30 dimensions and bearing configuration
Request a configuration and quotation
For a repeat OEM order, quote PULT62635-30, sample quantity and batch quantity. Attach the shaft and assembly drawing, including required fits, axial clearance and wheel position. Specify 85 Shore A tread and 2rs rubber seals, and confirm colour, lubrication, dimensional tolerances and packaging before sample approval. State any inspection or documentation requirements when requesting the quote.
Request PULT62635-30 samples and OEM batch pricing
Compare bore-mounted dual-bearing PU rollers
