You are here » Bearings » Plastic Coated Roller Wheels » PUT-Two Bearings PU Roller

10 mm Shaft Aluminum-Core PU Roller - PULT680030-30

10 mm Shaft Aluminum-Core PU Roller - PULT680030-30

10 mm Shaft Aluminum-Core PU Roller - PULT680030-30

For a 10 mm shaft and a 30 mm wheel envelope, PULT680030-30 offers a catalogue-defined aluminum-core polyurethane assembly. The 30 mm axial width, two 6800-2RS bearings and 85 Shore A tread should appear together on the quotation and sample specification; bore size alone is insufficient to identify the wheel.

Representative PULT aluminum core polyurethane rollers from the company catalogue

Representative PULT series photograph. It illustrates construction; confirm the selected model, colour and final appearance against the order drawing.

Catalogue dimensions and construction

Full modelPULT680030-30
Bearing bore d10 mm
Outside diameter OD30 mm
Overall axial width L30 mm
Core / treadAluminum / polyurethane
Tread hardness85 Shore A
Bearing arrangementTwo 6800-2RS chrome steel bearings
Bearing closure2RS rubber seals

PULT reference section identifying bore d outside diameter OD and axial width L

Series dimension reference. The table gives this model's nominal dimensions; request an approval drawing for tolerances, bearing seats and retention.

Check the installation before ordering

Check the 10 mm shaft and the fit required by the bearing inner rings. Allow for the 30 mm overall wheel width and 30 mm outside diameter. Review shaft shoulders, spacers and axial retention so tightening does not clamp the rotating wheel. State the contact surface, load direction, speed and duty cycle for suitability review; the catalogue dimensions alone are not an operating load rating.

Compare an existing ZOTY configuration

PULT680047-35 uses the same 10 mm bore and 6800-2RS bearing designation, with a 47 mm diameter and 35 mm width. This 30 x 30 mm wheel is 17 mm smaller in diameter and 5 mm narrower. A common bore and bearing code do not establish the same clearance or load capability.

Compare PULT680047-35 dimensions and bearing configuration

Request a configuration and quotation

For a repeat OEM order, quote PULT680030-30, sample quantity and batch quantity. Attach the shaft and assembly drawing, including required fits, axial clearance and wheel position. Specify 85 Shore A tread and 2rs rubber seals, and confirm colour, lubrication, dimensional tolerances and packaging before sample approval. State any inspection or documentation requirements when requesting the quote.

Request PULT680030-30 samples and OEM batch pricing

Compare bore-mounted dual-bearing PU rollers