5 mm Bore Miniature Aluminum-Core PU Roller - PULTMR9515-10

The 15 mm outside diameter and 10 mm axial width define a compact wheel envelope. For OEM batch purchasing, specify the complete roller assembly, including both MR95ZZ bearings and the aluminum core, rather than requesting an unspecified 5 mm bore plastic wheel.

Representative PULT series photograph. It illustrates construction; confirm the selected model, colour and final appearance against the order drawing.

Catalogue dimensions and construction

Series dimension reference. The table gives this model's nominal dimensions; request an approval drawing for tolerances, bearing seats and retention.

Check the installation before ordering

Check the 5 mm shaft and the fit required by the bearing inner rings. Allow for the 10 mm overall wheel width and 15 mm outside diameter. Review shaft shoulders, spacers and axial retention so tightening does not clamp the rotating wheel. State the contact surface, load direction, speed and duty cycle for suitability review; the catalogue dimensions alone are not an operating load rating.

Compare an existing ZOTY configuration

The existing PULT69522-50 also uses a 5 mm bore, but its wheel is 22 mm in diameter and 50 mm wide. This model reduces those dimensions to 15 mm and 10 mm. The bearing model changes from 695ZZ to MR95ZZ; the shared bore does not make the complete rollers interchangeable.

Compare PULT69522-50 dimensions and bearing configuration

Request a configuration and quotation

For a repeat OEM order, quote PULTMR9515-10, sample quantity and batch quantity. Attach the shaft and assembly drawing, including required fits, axial clearance and wheel position. Specify 85 Shore A tread and zz metal shields, and confirm colour, lubrication, dimensional tolerances and packaging before sample approval. State any inspection or documentation requirements when requesting the quote.

Request PULTMR9515-10 samples and OEM batch pricing

Compare bore-mounted dual-bearing PU rollers